Tekway Dome Tiles

TekWay® Dome – Tiles meet the requirements of the ADA and the Americans with Disabilities Act Accessibility Guidelines (ADAAG). www.access-board.gov - including TRUE truncated domes!
Materials used in manufacturing TekWay® Dome – Tiles comply with appropriate ASTM. You can be assured that only quality products comprise TekWay® Dome – Tiles.
TekWay® Dome – Tiles do not contain any hazardous substances such as volatile oil compounds, heavy metals or environmental contaminants. Protecting people and the environment is a vital component of StrongGo’s mission statement!

TekWay® Dome – Tiles are made with Iron Oxide Pigments. These inorganic metal oxides have long been known for their excellent 'Weatherability' and their strong Alkaline Resistance.

Further, they are also appreciated for their Lightfastness, which means their shade or color is unchanged by exposure to light, especially sunlight. In other words, TekWay® Dome – Tiles’ will not fade!

All Iron Oxide Pigments used in TekWay® Dome – Tiles have been tested and comply with the requirements of ASTM C979: “Standard Specification for Pigments for Integrally Colored Concrete.”

TekWay® Dome – Tiles are manufactured in five standard colors:
Yellow, Terracotta, Brown, Charcoal and Green.

Custom Colors are also available on a special order basis. Please contact our customer service department for further details. csd@stronggo.com

Because of State DOT requirements in CA and GA, the 1.67” center to center dome spacing is considered ‘standard’ and the 2.35” center to center dome spacing is considered ‘special order’.

Standard Size TekWay® Dome - Tiles

Sizes
2' x 2'

2' x 2.5'

1' x 1'

Wide Spacing
23.37" x 23.37" x 11/16"

23.37" x 30.42" x 11/16"

11.62" x 11.62" x 11/16"

Center to Center Dome Spacing is 2.35"

Please Note:
All sizes are nominal. All truncated domes are designed in a square pattern with parallel arrangement of the truncated domes.

Special Order Size

Sizes
2' x 2'

2' x 2.5'

1' x 1'

Close Spacing
24.06" x 24.06" x 11/16"

24.06" x 29.22" x 11/16"

12.02" x 12.02" x 11/16"

Center to Center Dome Spacing is 1.67"

Please Note:
Please allow up to 3 weeks for delivery, if outside CA or GA.

Since decisions in construction and engineering are primarily based on ‘hard facts’, and supported by independently conducted and verified ASTM (American Society for Testing and Material Standards) Test Results, manufacturer's of high-quality products provide this kind of important and valuable information for their products. Consequently, TekWay® Dome – Tiles have undergone specific and relevant ASTM-testing procedures.

The following, corresponding results give evidence that TekWay® Dome – Tiles have all the physical characteristics required for your project:

Property
Compressive Strength

Abrasion

Water Absorption

Freeze Thaw

Slip Resistance

Flexural Yield

Flexural Ultimate

Tensile Strength

Test Method
ASTM C 39-04

ASTM C 418

ASTM C 140

ASTM C 1262

ASTM C 1028

ASTM C 947-03

ASTM C 496

Results
11,760 psi

0.03 cm(3) / cm(2)

.49%

0.00%

Fa=0.86

1,985 psi

2,968 psi

2,325 psi

These test results assure you that TekWay® Dome – Tiles will last!

Therefore, you can trust and be confident, that they are indeed:
“The Perfect Fit for Any Project” ™.